 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
The air chambers are made from genuine European vulcanized
rubber. They are cloth backed and double thick for durability
and are a full 6 inches deep. The air chambers use a cross
vertical and horizontal baffle construction that creates square
pockets of air that provide uniform support and comfort from
head to toe. The 25 mil rubber uses a vulcanization process that virtually eliminates all seams. The material
actually flows together and becomes a one piece construction. The natural cotton backing material is adhered
chemically to the latex. This creates a soft, smooth texture and at the same time eliminates air leakage through
the pores of the rubber. The chamber borders are double seamed with two 1.25 inch seams, one reinforcing the
other. Double sealing creates a more reliable support system for years of proven longevity and trouble free use.
Inside the air chambers you will find our incredibly strong I-Beam construction. Other companies talk about
I-beam construction, but they don't use the same system we do, usually using a single sided sealing system. Our
I-Beams are made up of two layers of canvas and two layers of rubber bonded together to join the top and the
bottom of the air chamber. Where the I-Beam meets the top and bottom of the chamber, the canvas/rubber
layers flair out each way, offering twice the holding power of a single sided system for extra strength and years of
durable use. The sophisticated baffling system of our chambers creates little square pillows of air that keep the
spine aligned for maximum comfort and support without the hammocking that can occur with some other air
chambers you may find out there. Our square pillow system evenly supports the entire body, no matter whether
you sleep on the edge of the bed or with a soft or firm inflation level. Because this design eliminates the need for
a foam wedge between dual air chambers, sleepers can sleep in the middle of the mattress without feeling
anything but the ultra comfortable mattress they purchased, and without the sensation of rolling toward the middle
of the bed, regardless of the selected inflation level. Before shipping, each air chamber is thoroughly tested to
ensure years of trouble free use.
Connections:
The air hose is permanently sealed to the air chamber to eliminate
the possibility of air loss. Special flexible rubber is used at the time of
manufacture to create this single unit with no external connections.
The hose includes an embedded layer of surgical steel coil to help
create a quieter and more responsive inflation process. Improved pump life and more precise control are also
results of this kink free design. The connector from chamber hose to the pump is a barrel twist and lock
connector. This locks in place to prevent any accidental disconnection and keeps contaminates from entering air
chamber. Our competitors use cheaper clip-on connections which can leak air and allow contaminates. Housed
within the twist and lock connector is the seal that prevents back flow of air when the pump is detached from the
air chambers, which means the user can move the mattress without deflating it.
Foam Rails:
Our rails are not held together with Velcro like the national brand.
Our foam rails use an interlocking sling system to keep the mattress
square and true. By locking these rails together, the air chambers are not able to migrate outwards which can
lead to a rolling to the center feeling. The as seen on t.v. air bed uses only Velcro to attach the corners and or
uses a hard plastic corner locking system. This does not give any support to the rail the length of the mattress.
This is another reason they have to put a three inch wide foam strip in-between the air chambers, to help reduce
the rolling feeling experienced while laying towards the middle of the bed. The design maximizes the sleeping
surface to provide the largest sleep surface possible.
Standard Chamber Foam or Upgrade to 1.5" Memory Foam.
rubber. They are cloth backed and double thick for durability
and are a full 6 inches deep. The air chambers use a cross
vertical and horizontal baffle construction that creates square
pockets of air that provide uniform support and comfort from
head to toe. The 25 mil rubber uses a vulcanization process that virtually eliminates all seams. The material
actually flows together and becomes a one piece construction. The natural cotton backing material is adhered
chemically to the latex. This creates a soft, smooth texture and at the same time eliminates air leakage through
the pores of the rubber. The chamber borders are double seamed with two 1.25 inch seams, one reinforcing the
other. Double sealing creates a more reliable support system for years of proven longevity and trouble free use.
Inside the air chambers you will find our incredibly strong I-Beam construction. Other companies talk about
I-beam construction, but they don't use the same system we do, usually using a single sided sealing system. Our
I-Beams are made up of two layers of canvas and two layers of rubber bonded together to join the top and the
bottom of the air chamber. Where the I-Beam meets the top and bottom of the chamber, the canvas/rubber
layers flair out each way, offering twice the holding power of a single sided system for extra strength and years of
durable use. The sophisticated baffling system of our chambers creates little square pillows of air that keep the
spine aligned for maximum comfort and support without the hammocking that can occur with some other air
chambers you may find out there. Our square pillow system evenly supports the entire body, no matter whether
you sleep on the edge of the bed or with a soft or firm inflation level. Because this design eliminates the need for
a foam wedge between dual air chambers, sleepers can sleep in the middle of the mattress without feeling
anything but the ultra comfortable mattress they purchased, and without the sensation of rolling toward the middle
of the bed, regardless of the selected inflation level. Before shipping, each air chamber is thoroughly tested to
ensure years of trouble free use.
Connections:
The air hose is permanently sealed to the air chamber to eliminate
the possibility of air loss. Special flexible rubber is used at the time of
manufacture to create this single unit with no external connections.
The hose includes an embedded layer of surgical steel coil to help
create a quieter and more responsive inflation process. Improved pump life and more precise control are also
results of this kink free design. The connector from chamber hose to the pump is a barrel twist and lock
connector. This locks in place to prevent any accidental disconnection and keeps contaminates from entering air
chamber. Our competitors use cheaper clip-on connections which can leak air and allow contaminates. Housed
within the twist and lock connector is the seal that prevents back flow of air when the pump is detached from the
air chambers, which means the user can move the mattress without deflating it.
Foam Rails:
Our rails are not held together with Velcro like the national brand.
Our foam rails use an interlocking sling system to keep the mattress
square and true. By locking these rails together, the air chambers are not able to migrate outwards which can
lead to a rolling to the center feeling. The as seen on t.v. air bed uses only Velcro to attach the corners and or
uses a hard plastic corner locking system. This does not give any support to the rail the length of the mattress.
This is another reason they have to put a three inch wide foam strip in-between the air chambers, to help reduce
the rolling feeling experienced while laying towards the middle of the bed. The design maximizes the sleeping
surface to provide the largest sleep surface possible.
Standard Chamber Foam or Upgrade to 1.5" Memory Foam.
| The Inside Components of Sleep Comfort Air Series? |
Foundations
Unlike many competitors, Sleep Comfort USA uses only pre-assembled foundations with all solid wood
construction and solid Masonite support tops. Our solid state foundations are the strongest, most durable and the
safest foundation on the market. Most competitors use flimsy cardboard topped or plastic erector-set style
foundations that are very difficult and time consuming to assemble. All of our foundations have elegant matching
fabric. Our King and Queen foundations are constructed in a dual split foundation design that is visually more
appealing is easier to maneuver through your residence.
Unlike many competitors, Sleep Comfort USA uses only pre-assembled foundations with all solid wood
construction and solid Masonite support tops. Our solid state foundations are the strongest, most durable and the
safest foundation on the market. Most competitors use flimsy cardboard topped or plastic erector-set style
foundations that are very difficult and time consuming to assemble. All of our foundations have elegant matching
fabric. Our King and Queen foundations are constructed in a dual split foundation design that is visually more
appealing is easier to maneuver through your residence.
